How Much Does Gutter Installation Cost In 2024? (North Carolina)

How Much Does Gutter Installation Cost In 2024?

The cost of hiring a professional to install or replace your gutters in North Carolina ranges from $650 to $4,300, depending on the materials and the size of your roof. On average, the cost is $2,450, which does not include pricier materials like Copper and Zinc.

Generally speaking, a typical homeowner choosing aluminum, steel or vinyl gutters for a standard-sized roof can expect to pay an average of approximately $1,550. This cost can be affected by additional services such as downspouts and gutter guards.

It’s important to act quickly when your gutter system fails, as it typically lasts 15 to 20 years. If you ignore the issue, you could end up with extensive roof and attic damage, as well as possible mold and pest infestations.

Average Gutter Installation Cost in North Carolina

Average Cost $2,450
Highest Cost $4,300
Lowest Cost $650

Cost of Gutter Per Linear Foot

The total cost of your gutters will vary depending on the size of your roof and the length of gutters you need. Generally, materials like vinyl gutters are more affordable and typically cost between $3.50 to $5.50 per linear foot. On the other hand, materials like copper and Zinc gutters are more expensive and can cost up to $45 per linear foot.

To estimate the total project cost, measure the length of each roof section in linear feet and the height of each corner all the way from the roof to the ground floor. Then, add these figures together and multiply the result by the cost range of your preferred gutter material type. This should give you the total cost of the job, including the addition of downspouts.

It’s important to keep in mind that this estimate may not reflect the actual cost, as slope, pitch, and other factors may affect the final total. However, it should provide a good estimate.

Cost of New Gutters by Type

When it comes to cost, the size of your roof isn’t the only factor to consider. Different types of gutters come with varying price ranges and benefits, as well as different scenarios for use that may be better suited for your needs. It’s important to understand the pros and cons of each option before making a decision.

Aluminum Gutters

Aluminum gutters are a popular choice due to their cost-effectiveness. On average, they cost around $5.50-$16 per linear foot, making them a great option if you’re on a budget. Plus, they’re easy to install, which helps reduce labor costs. Although aluminum gutters are more durable than vinyl, they can be more prone to damage from debris and wind.

Vinyl Gutters

If you’re on a limited budget, vinyl gutters may be a good choice for you. These gutters are the most affordable option, priced at $3.50 to $5.50 per linear foot. However, it’s important to note that vinyl is a more fragile material than metal and tends to crack over time, so they may not last as long as others – typically 15-to-20 years. Despite this, vinyl gutters are a good option if you’re looking for a more cost-effective choice.

Copper

If you want a gutter option that can withstand severe weather events without any problems, then copper gutters are an excellent choice. They are durable and reliable, but you should be aware that they come at a higher price than other options.

Copper gutters may be more expensive than other options, with a price range of $18 to $45 per linear foot. But, it’s important to consider their strength and durability, as well as the long-term savings associated with reduced repairs. So, while the initial cost may be higher, copper gutters could easily pay for themselves after a while.

Zinc

Although zinc can be more expensive than copper, the pre-weathered zinc gutters are worth the investment. These gutters range from $15 to $36 per linear foot and are built to last with a self-healing surface that resists scratches and scrapes. Additionally, zinc is corrosion-resistant and won’t rust even when exposed to high levels of moisture.

Zinc gutters are a great option, but they do have one vulnerability that copper does not have: they can be affected by salt water. So if you live close to the sea, you may want to choose another material. The gutters won’t be ruined, but they may be discolored over time.

Stainless Steel

Stainless steel gutters are virtually indestructible and provide excellent durability for their cost – ranging from $12 to $24 per linear foot. Not only do they resist dings and leaks, but they are also able to withstand damage due to severe weather events.

Installing and repairing steel components can be time-consuming, resulting in higher labor costs. Additionally, if your home is located near the ocean, steel may not be the best material option due to its susceptibility to salty air.

Sectional vs. Seamless Gutters

Sectional gutters are a cost-effective option, typically ranging from $4.50 to $35 per linear foot. They come in pre-cut lengths of 10 or 20 feet, and link up along the edge of your roof. While they are durable, the attachment points may weaken over time, leading to potential leaks or corrosion.

Seamless gutters offer a more aesthetically pleasing look and are custom cut to fit the exact dimensions of your roof. Additionally, because there are no attachment points, they are more durable and long-lasting than sectional gutters. The cost of installing seamless gutters ranges from $5.50 to $45 per linear foot, depending on the material.

Additional Gutter Installation Cost Factors

It’s important to remember that beyond roof size and materials, there are some other factors that can affect the cost of installing gutters.

Gutter Systems

It’s important to consider more than just the materials used when selecting a gutter system. Three popular shapes are available.

Half-Round

Half-round gutters, also known as U-style gutters, are a common gutter shape found in older homes, and typically cost between $4.50 and $38 per linear foot, depending on the material. They are good for carrying water, but may not be as effective at dealing with debris. In some locations, these gutters may be required by code. If you’re unsure, it’s best to check with your local building department.

K-Style

K-style gutters are the most popular choice for newer homes built in the last 50 years or so. These gutters resemble the letter “K” when viewed from the side and they typically cost between $5.50 and $36 per linear foot depending on the materials used. They perform well in rainy climates and offer plenty of benefits for most homeowners. However, they can be difficult to clean due to the inner angles collecting debris.

Custom-Built/Box Gutter

If you’re looking for a tailored solution to divert moisture and debris away from your home or commercial building, custom fascia gutters may be the best option. These gutters are made from a single piece of steel, aluminum, copper, or zinc to perfectly fit the dimensions of your roof. However, custom gutters come with a higher price tag, ranging from $6.50 to $45 per linear foot, and must be professionally fabricated and installed.

Gutters Materials For Installation

When it comes to gutters, keep in mind that you should factor in installation materials in addition to the materials that make up the actual gutters. Fortunately, these costs are usually minimal and the pros typically include them in their quotes.

When installing gutters, pros come prepared with all the necessary items, such as gutter screws, hangers, sealant, outlets, and potentially a dedicated crimper. Fortunately, none of these items are too costly.

Climate

When installing gutters, it’s important to take the local climate into consideration. Different materials and designs may be more suitable for your roof, depending on the weather. For instance, vinyl gutters may not be able to withstand strong winds, and stainless steel gutters could corrode if the air contains high levels of salt, like near the ocean.

It’s important to keep the weather in mind when planning the installation process. Ideally, you want a good week or two without rain to complete the project. However, if you’re trying to work around sporadic rain, the labor costs may increase.

Gutter Replacement Cost

If you are replacing gutters, you should expect to pay an additional $1 to $2 per linear foot for the labor involved in removing the old gutters and any connective parts.

It’s important to keep in mind that a full gutter replacement may require more than just removing the old gutters. The fascia and soffits may need to be repaired or replaced, which can be costly – typically ranging from $1,400 to $5,200. However, in most cases, gutter removal is the only step required.

Gutter Replacement Cost

Average Cost $2,600
Highest Cost $4,600
Lowest Cost $900

Other Gutter Installation or Replacement Costs

Gutters play an important role in protecting your roof from debris and moisture build-up, but certain consumers may also have to factor in additional costs if they wish to maximize their gutter’s effectiveness.

Downspout Extension Costs

Your pro may recommend adding another downspout or two to the system to increase efficiency and handle the moisture and debris more effectively. The installation cost of a new downspout is typically between $4 to $8.

If you’re noticing water and debris pooling around your house in a way that detracts from the aesthetics of your yard, consider adding an extension to your downspouts. An extension can help the water exit further away from your house.

If you’re looking to bury the downspouts for aesthetic reasons, it will cost up to $24 per linear foot. Otherwise, extending a downspout is typically between $6 and $16 per unit at ground level.

Gutter Guards Installation Cost

Gutter guards minimize debris in your gutters, helping them last longer and making for a quicker cleaning process. The cost of hiring a professional to install a full set of gutter guards for your entire system may range from $900 to $2,100, depending on the size of your roof and the materials used.

If you’re considering a DIY project on your roof, you should be aware that while there are DIY options that can reduce the cost, it’s not the safest place to work and it requires a certain level of experience. For this reason, it’s best to leave this job to the professionals.

Extras

It’s important to note that the total material cost for a gutter system includes more than just rain gutters. Your installation estimate will factor in fees for components such as brackets, downspouts, elbows, gutter end caps, hangers, and splash blocks—all of which must match your gutter material and style. Additionally, gutter flashing may need to be installed on your home’s roof to help direct water into the gutter, and this will all be reflected in the final billing.

The following prices are for standard K-style aluminum gutter components:

• Hangers: $0.24–$12.35 each
• Downspouts: $16–$54 per 10 linear feet
• Elbows: $1.75–$10.50 each
• Gutter flashing: $0.91 per linear foot
• Gutter end caps: $1–$8 each
• Splash blocks: $8.79 each

DIY vs. Hiring a Pro for Installation or Gutter Repairs

If you’re considering a DIY gutter installation, it is important to keep safety in mind. Many gutter types can be snapped together, but you’ll need some tools and safety equipment. Make sure you have a strong, extendable ladder and the appropriate safety gear, as much of the work takes place on the roof. Experience in working with ladders and gutters is also essential.

It is important to note that while friends may be able to help with the job, it is still likely to take a full day. Professionals, however, have the necessary experience and expertise to complete the job much quicker and with much greater ease, as they are familiar with the different gutter and roof designs.

It is best leave gutter repairs to the professionals. Without the correct knowledge and experience, you may not be able to identify the problem or find an appropriate solution. Professional gutter experts have the proper license and insurance to handle the job safely and effectively.

Please be aware that the average costs in this article have been provided by our local gutter supplier and may be subject to change.